Loading...

WEISS INT204 USB/DSD

10.478,82 lei

Intreaba despre stoc!

 

The INT204 is a USB to AES/EBU (unidirectional) interface which also handles DSD to PCM conversion. DSD files played to the INT204 result in conversion to PCM at a, selectable, sampling frequency and word-length. So your trusted D/A Converter becomes a DSD capable DAC.

 

Your favorite D/A converter may not be the latest but you like its sound, appearance and features. So you don’t want to buy another expensive DAC just to connect it to a computer.

 

This is where our interfaces come in. The INT204 allows any DAC to be connected to a USB ported computer. This is done, optimally, by slaving the computer’s clock to the INT204’s internally generated clock.

 

In addition the INT204 can work as a digital volume control device, controlled via an infrared remote unit

 

Mechanics

The INT204 is housed in a silver anodized aluminum frame.

Power Supply

Two power sources are required for the INT204. One is the bus power fed via the USB connector, the other is an external power supply which is supplied with the INT204 unit. This scheme allows to have the input and output sections of the INT204 galvanically isolated.

Synchronization
The sampling frequency is generated with an internal generator in the INT204. This makes sure the transfer between computer and D/A Converter is low jitter.

Digital Input
A USB type B connector is used a connection to the computer.

Digital Outputs
There are one XLR socket, one BNC socket and one RCA socket. BNC and RCA sockets are driven by the same driver chip.

Front panel controls

There are eight LEDs for sampling frequency display and power status. A switch allows to select the sampling frequency when doing DSD to PCM conversion (176.4 or 88.2 kHz). Another switch selects the word-length when doing DSD to PCM conversion (24 or 16 Bit). A power switch handles the power on/off for the external power supply input.

Back panel elements from left to right
There is a power inlet for the external power supply, the USB connector, the three output connectors (BNC, RCA, XLR).

Software features

The INT204 can do DSD to PCM conversion at selectable sampling frequencies and word-length (88.2 or 176.4 kHz and 16 or 24 Bit). The DSD input is in the DoP format with a sampling frequency of DSD64 (2.8224 MHz) or DSD128 (5.6448 MHz).

Supported PCM sampling frequencies are all standard frequencies between 44.1 kHz and 384 kHz. The sampling frequency of 352.8 kHz is automatically converted to 176.4 kHz and the sampling frequency of 384 kHz is converted to 192 kHz as the AES/EBU or S/PDIF formats do not support sampling frequencies higher than 192 kHz.

Remote Control

Optionally an IR remote control can be purchased to control the audio volume in the digital domain.

Citeste mai mult
Brand

WEISS

Reviews

There are no reviews yet.

Be the first to review “WEISS INT204 USB/DSD”

Adresa ta de email nu va fi publicată. Câmpurile obligatorii sunt marcate cu *

Folosim cookie-uri pentru a imbunatati experienta ta in magazinul nostru online. Continuarea navigarii pe website reprezinta acceptul tau cu privire la acest lucru.
Produs adaugat!
Produsul exista deja in wishlist!

Shopping cart

close